TUTORIAL; HOW TO MAKE ASBAK KACA

HOW TO MAKE A WHITE FROM A USED GLASS

TOOL
1. Sandpaper
2. Basin
3. Scissors
4. Straight iron as a cutting tool
5. Markers
6. Glass cutter
7. Tang
8. Iron
 

INGREDIENTS
1. Glass used with thickness 3 mm and 5 mm
2. Secondhand mirror with 2 mm thick
3. H2O2 (Hydrogen Peroxide) with 50% concentration as much as 200cc
4. Glue glass
5. Citric acid (citric) packaging small
6. Sponge
 

HOW TO MAKE ASBAK
1. Cut glass that has a thickness of 5 mm, with the following sizes: 10 x 10 cm as much as 1 piece, 

    2 x 2 cm as many as 4 pieces, 8 x 1 cm as many as 28 pieces
2. Cut glass that has a thickness of 3 mm, with the following sizes: 7 x 7 cm as much as 1 piece, 

    3 x 7 cm as many as 4 pieces
3. Cut a mirror that has a thickness of 2 mm, with the following sizes: 4 x 1.5 cm as many as 4 pieces,

    3 x 1.5 cm as many as 4 pieces
4. Cut a 2 x 2 cm sponge by 4 pieces
5. Use a glass that has a thickness of 5 mm with a size of 10 x 10 cm as a base / base ashtray
6. Create a wall / frame ashtray using a glass that has a thickness of 5 mm with a size of 8 x 1 cm of 

    28 pieces, by arranging it like a brick by using glass glue

7. Giving glue on the glass should be by applying glue from the middle then elongated to the side

8. Create an arch on the mouth of the ashtray (as a place to put cigarettes) by using a glass cutter and 

    then smoothed using sandpaper
9. Make an ashtray foot by attaching a glass that has a thickness of 5 mm with a size of 2 x 2 cm 

    on all four corners of ashtray 

10. Attach the sponge to the four legs of the ashtray
11. The result is like the picture below

MAKING DRIED LEAVES AS ORNAMENTS
1. Combine H2O2 with two-thirds of a pack of citron (small packing) on the basin
2. Put the butterfly leaves into the mixture
3. Soak at least up to 1 day 1 night
4. Drain the leaf and then dry
5. In order for the leaves look better and neat, setrikalah the leaves one by one
6. Leaves ready for use

INSTALLATION OF DRY LEAVES AS ORNAMENTS
• Arrange the dried leaves earlier in the base in the ashtray with the pattern as below  

• Left bended leaves are then affixed to the inside wall of the ashtray
• Press the leaf using a glass that has a thickness of 3 mm with a size of 7.5 x 7.5 cm (without glue)

• Arrange a few more leaves on the wall in an ashtray tucked outside the rest of the original leaf, 

  as shown below 

• Once neatly arranged, press / press using glass that has a thickness of 3 mm with a size of 

  7.5 x cm
• Repeat the above activities until all the inside of the ashtray is closed, preferably the use of glue  is only used to glue the two sides of glass that really should be attached. Because, the remaining visible glue will reduce the esthetic value of the ashtray
    • Cut out the remaining leaves that are not covered in glass
    • For upper / mouth ashtray (part of leaf and glass intersection), covered with a mirror that has  a thickness of 2 mm
   • The result is as shown below...